Our company has all the equipment needed for production of blanks which allows us
to ensure a complete production cycle:

• гguillotine for cutting of sheet metal up to 6 mm thick and up to 2500 mm wide
• plasma cutting machine for cutting of metals with a thickness of up to 200 mm and a working area of 1500x3000
• пautomatic feed saw which cuts any material up to Ø 520 mm, up to 12000 mm long

Laser cutting and water-jet cutting are available.

We have more than ten CNC custom turning machines ranging from high-precision (6th grade) to high-performance operations on machines with a rod feeder.

The minimum and maximum diameters are from Ø 6 to Ø 500 respectively.

We also have HYNDAI turning equipment with vertical and horizontal spindles and maximum machining diameter of up to 600 mm and length of 2000 mm. The driveheads with a provision for installation of milling tools and steady rests allow us to significantly expand the capabilities of our turning equipment.

Our ten HYNDAI 3D and 4D CNC milling machines with vertical and horizontal spindles allow us to solve the whole range of technological milling processing tasks.

Maximum working dimensions for horizontal spindle machines: 700x700x700.

Maximum working dimensions for vertical spindle machines: 1500x700.

The gear cutting equipment provides the following operations with accuracy degree 8:

• НTeeth cutting of cylindrical straight and helical gears with a diameter of up to Ø 500 mm and a module up to 8 mm
• Cutting of straight teeth conical pairs with a diameter of up to 500 mm and a module up to 8 mm
• Cutting of circular-arc teeth with a diameter of up to 600 mm and a module up to 16 mm
• Gear shaping with a 12 mm module of up to Ø 800 mm parts
• Production of worm-and-worm gears with a module of up to 8 mm

The gear grinding equipment available in our company ensures accuracy degrees 6 and 7.

Our grinding equipment provides:

• Surface grinding for dimensions of 1000x350 mm
• Circular grinding for dimensions of up to Ø 500 mm
• Internal grinding up to Ø 400 mm
• Centerless grinding from Ø 6 to Ø 40 mm

The surface grinding machine with Ø 1000 mm round table provides high-speed machining of flat parts.

In 2015 we acquired vacuum heat-treating furnaces from Bulgaria and Poland. he furnaces allow us to perform heat- and chemical-heat treatment in a vacuum environment:

• Nitriding of parts with a diameter of up to 750 mm and a length of 1000 mm
• Cementation and carbonitriding of parts with dimensions of up to 600 mm x 600 mm x 900 mm (600 kg)
• Normalization, quenching, tempering, aging operations

Vacuum heat treatment significantly reduces distortion processes; the surfaces remain clean, without carbon deposits. This allows processing of intricate parts with finish dimensions or minimal allowances.

Our modern painting chambers (10 m x 5.5 m x3.3 m) allow priming, painting and further drying in the drying chamber with a temperature up to 80°С.

Welding operations are performed in a 2,500 m2 workshop. The lifting capacity of the cranes is maximum 20 tons. Our certified welders work with various materials (stainless, nonferrous, ferrous, hard-to-weld high-alloy metals) on duly equipped German jigs (FORSTER) with a total area of 52 m2.

We also have seam and spot welding equipment.

Modern wire EDM machines provide cutting out any internal or external contours with working area dimensions of 1050 x 800 x 250 including internal splines or external teeth.

Our company has expertise in the development and manufacture of molds for rubber products, and not only rubber. We can manufacture both molds/fixtures and the required quantity of parts.

We manufacture high pressure hoses with diameters from Ø 10 to Ø 56. All hoses are subject to pressure tests (max 1,200 atm.) which is confirmed by the relevant documents.

Manufacturing, repair determination and repair of cable systems, as well as various units, control panels of various vehicle mechanisms, distribution boxes and other electrical items

НOur new equipment provides drilling, boring, rolling and honing on a length of 2,000 mm with the diameter of the hole of 200 mm and roughness of 0.2

MPKTI provides die casting services into rubber dies on automatic machines.

We offer the service of printing 3D objects using a digital 3D model.

We manufacture torsion shafts including those according to OST V3-4284-88 with a length of up to 2,000 mm

Upsetting and grinding of all surfaces, heat treatment, rolling of the torsion body, rolling of the splines, predeformation

We have manufactured over 300 test benches for our own needs and at the request of the customers. The test benches are made for vehicle units and assemblies.

Our staff includes over 100 process and design engineers who are able to solve any tasks of your technical assignment using modern approaches in hydraulics, mechanics, electrics and electronics.

Our company has mastered the rotary drawing technology which allows making products of sheet material of those configurations that previously could only be obtained by die stamping.

Our staff includes over 100 process and design engineers who are able to solve any tasks of your technical assignment using modern approaches in hydraulics, mechanics, electrics and electronics.